Tips on syncing a replacement hand remote (Update Dec. 3, 2024)
Now listen. when a person buys a replacement hand remote, or has a second hand remote out of functional circulation as in a backup, the Channel it is on as in the frequency can be incorrect. That is because your receiver and functional hand remote will self assign frequencies to better facilitate communication based on the needs of the site. See video below
Channel search is activated in the following way:
Ensure receiver is on.
Turn hand remote on without touching any buttons
Put the dial to the max position (all the way to the right)
The with the dial still all the way to the right, hold both the up5 and down5 buttons
No matter what (~10 seconds) keep holding the buttons till it says “Rev 2 search” then immediately let go the buttons before the scroll ends. Otherwise you will abort.
it will setup the receiver, then ping until the receiver communicates back, then when done it will display numbers.
If it finds it, your done and you see numbers. its a one time thing