Code 036 Hand Remote pertaining to EVOx+ attachments

The Thumb attachment code 035 and greater is activated in the following way.

  1. Ensure hand remote and receiver are communicating with each other.

  2. Thread on thumb attachment

  3. Put the hand remote dial to minimum and then put your thumb slider to minimum

  4. Done right it will say “side thumb ok”

In order to use maximum constrain on the thumb slider alone,

  • Move hand remote dial to maximum, and then hold down top button of hand remote

  • While holding top button, move slider to set new max, Let go when done.

  • Move hand remote dial to maximum, and then hold bottom button of hand remote

  • While holding bottom button, move slider to set new low, Let go when done.

The Up5Dn5 attachment can be activated with code 036 in the following way.

  1. Ensure hand remote and receiver are communicating properly

  2. Thread on up5dn5 attachment

  3. While holding top button on hand remote, depress both up5dn5 attachment buttons simultaneously

  4. Buttons on attachment send the up5 or down5 signal on the “let go” of the button

The Wizard of Rod