Up5Dn5 Attachment
A quick writeup regarding the Up5Dn5 attachment until I make a more comprehensive one.
In order to activate your side attachment, ensure first that your hand remote dial and receiver are communicating effectively. Then, do the following
put your hand remote dial in the middle. As in not minimum or maximum.
press both buttons of the up5dn5 attachment at the same time and continue holding
then press the top button of the hand remote (that means your holding three buttons)
Done right it will it activate. At tha point, it sends the signal on the “let go”
Additionally, if operated at very close distance to the receiver, the receiver will accept the signal, but the hand remote may miss the return signal. Operation has still succeeded.
To get out of this mode, restart the hand remote