Rheostat Calibration (Advance User)
When you receive your rheostat receiver, it may or may not have the same feel of your corded remote. This is because every oem rheostat has a different ohmic meseaurement. As well, your total gauge and cordage affect this. Fortunately, I have pre calibrated the unit for you.
The first menu is lower rheostat calibrate. It will lower the bottom end of heat by a five percent increment. To do just this you must do the following:
Hold the green button down at hand remote startup
Re enter the amperage adjustment menu
Enter 122 & 352 to decrease the receiver lower value by approximately 5%
done right, it will say "decrease rheo:"
The second menu is raise rheostat calibrate. It will raise the lower threshold of heat by a five percent increment. To do just this you must do the following:
Enter the amperage adjustment menu
Enter 100 & 400 to authorize the change. It will say "Authorize:"
Do not turn off your hand remote
Re enter the amperage adjustment menu
Enter 122 & 372 to increase the receiver lower value by 5%
done right, it will say "increase rheo:"
Should you get hung up and lost reference, to return the rheostat back to original settings, do the following:
Hold the green button down at hand remote startup
Re enter the amperage adjustment menu
Enter 122 & 362 to return the rheo to original setting
done right, it will say "original rheo:"