EVOX GAMECHANGER CHANNEL ADJUST TIPS
This short write up is to introduce you to channel hop and how it relates to the evox gamechanger. The gist is your hand remote and receiver are on a frequency channel. There are 26 channels corresponding to a letter. To find out which channel your hand remote and receiver are on, rotate your hand remote dial to max and hold both buttons. It will display a letter.
That letter must match the letter displayed on the screen of the evoxgamechanger
The gist is your hand remote set and receiver will change frequencies automatically if it detects another evox in the vicinity operating on the same channel. This is not a concern for a user with only hand remote and receiver. However, if you are reading this, you have a third component.
Should your hand remote and receiver change channels on you while your not using your evoxgamechanger, it will not communicate and be on the wrong channel.
The next step for you is channel search. channel search is a built in function that will sweep the airwaves and recapture the proper channel. To access it on a evoxgamechanger, the following steps must be performed
on a thumb evoxgamechanger, sweep the thumbwheel from min to max repeating until the dial reverses. now, perform it again. Done right, it will say channel search and sweep the airwaves searching for you receiver until it talks to it. once it does, that’s it
on a button evoxgamechanger, press up and down alternating approximately fifty times. over ten, it will show you a counter on the screen so you don’t second guess yourself. once achieved the required up and downs, it will go straight into channel search and sweep the airwaves looking for your receiver. once they talk, the function is complete