The Arcade Hand Remote (EVOX)

To access the Up5 Down5 mode of a freshly started arcade remote do the following:

• after you see numbers, ensure its not minimum or maximum on the dial

• hold down top button, then hold down buttonn not letting go of both until you see "Up Down Ok!"

• tap one button to refesh the number into incrementals

• It should start off where the dial was last left.

the bottom button while the dial is not on minimum if depressed for three seconds will trigger a hot start and only go back once you release the bottom button.

TIP if the screen is off during this mode, moving the dial will ‘refresh’ the amps for your knowledge without changing the heat

To regain your dial, you can do two things:

• Sweep back and forth from min to max at a regular speed until it engages

• restart your hand remote